Importing A Trailer From the US Into Canada

Importing A Trailer From the US Into Canada
If you are like me, you may have found this page because you are considering importing a trailer into Canada from the US, but aren’t sure how complicated the process is. At first glance this may seem like a lot to take in, but don’t be daunted – it is actually pretty easy. As long as you have your ducks in a row, you will have a smooth importation process. While doing my own research I found the following very useful: It was resources like these that made figuring out the process so easy. I have expanded on some steps and detailed my own experiences. You can read more about the journey to collect the trailer here.
A quick note: I live in British Columbia, Canada and purchased a tiny house trailer from Iron Eagle in Oregon, US. While the importation process should be similar for your province, some specifics will undoubtably differ. The following is based on my experiences and you should always do you own research as details and prices may change over time.

Before Trailer Pickup

The following steps should be done in preparation before you travel to collect the trailer. You do not need to contact US or Canadian customs in advance for the importation of trailers.

Order trailer

Get the VIN (Vehicle Identification Number), invoice and pick-up date as soon as you can. These will come in handy later on.

Check with RIV

Once you have the VIN you can can call the RIV (Registrar of Imported Vehicles) to check that the trailer is admissible into Canada. It should be, and they should provide a reference number for your records.

Get binder of insurance

You need to get an insurance policy to cover the trailer from the point of purchase in the US to your final destination in Canada. ICBC call this a ‘binder of insurance’.

Get a trip permit

When driving the trailer back to Canada you may need a temporary permit for each US state you drive through. In my case this was just Washington, and I was able to buy a 3 day trip permit on the Washington State Department of Transport website (WSDOT).

After Trailer Pickup

If the followed all of the previous steps and have all of your paperwork with you, the following should be straight forward.

Pick up trailer

When you purchase your trailer you should get the title (or a ‘Certificate of Origin’) and your receipt. You will need these at the border. I also got a ‘letter of no recall’ from the manufacturer as I had heard this mentioned during my research, but this was not asked for at any point.

Declare trailer at border

Upon arriving at the Canadian border you need to declare the trailer. You will then need to go in to the Canada Border Services Agency (CBSA) building to start the importation process and to pay 5% GST (Goods and Services Tax). Upon producing the trailer title and receipt, you will get a ‘Vehicle Import Form’  (also know as a ‘Form 1’) which will get a stamp in the top right corner. The CBSA should send a copy of your Form 1 to the RIV.

Pay RIV fee and obtain RIV inspection form

When you get home you can go online and pay the RIV fee. You will need the case number located top right of your Form 1. Once paid, the RIV will provide you with a ‘RIV Inspection Form’ which you will need for your inspection.

Book your RIV Inspection

Call your nearest Canadian Tire (who seem to have a monopoly on these inspections) to get booked in for your RIV inspection. I suggest getting an early appointment so ICBC will still be open once you are done, meaning you can do two steps in one day (and therefore only requiring one temporary operating permit).

Get a temporary operating permit

You will need to go to ICBC to get a temporary operating permit in order to get the trailer to Canadian Tire for the inspection, and then to ICBC to register the trailer.

Canadian Tire Inspection

Take all of your paperwork with you. After a quick inspection (mine took 5 minutes) you should get a tick in all of the boxes of your RIV Inspection Form which they will send to the RIV. Most importantly you will get the second stamp on your Form 1.

Register the trailer

Go to ICBC to register and insure the trailer. You will need the trailer with you, as well as all of your paperwork. Once you have paid the PST (Provincial Sales Tax) on the trailer you should walk out with the Canadian vehicle registration, insurance documents and a number plate.
Congratulations, you’re done! You should receive a ‘Canadian Certification Label’ from the RIV in the post, which you are required by law to affix to the trailer. Good luck!

14 thoughts on "Importing A Trailer From the US Into Canada"

  1. Gilbert says:

    Hi Joe,

    This article is really helpful and with all the shared experiences on this topic. Thanks so much. I’m about to go down to states to bring back the travel trailer, however I’m curious whether I need to stop by US CBP office to present original certificate of title and the trailer, or just drive straight to the Canadian border entry? (I am aware of only motorized vehicles required to provide AES filing at least 72 hours before the vehicle is exported from the US, and the vehicle must be presented to US CBP)

    Your insight is very much appreciated.

  2. Dan Anderson says:

    A temporary permit is only required from one US state. The other states are required to honor the permit due to a provision in the US constitution about recognizing the acts and deeds of other states. Hope this helps.

  3. Danny Walker says:

    Does a person have to pay state and/or Federal taxes in the U.S. when buying a trailer?
    or is there an exemption?
    thanks,
    Dan

  4. patrick says:

    .Did you have to pay the state tax in the state you bought the trailer ?
    Or you were able to avoid the state tax since it was not being plated in that state. I am looking at buying a new travel trailer from a dealer in the USA and I live in Ontario

  5. Rick Gaudreau says:

    Hi Joe and thank you for posting these step-by-step instructions for importing in a trailer. I have a question, I might be at some point looking to purchase a small single axle, (maybe a double-axle) open utility trailer. It might be used if I find a good deal or new from Florida and bring it back with me to bring back some personal belonging I have in a home down there. Would you know if this same process needs to be followed for a smaller utility trailer (maybe 10-14 feet long)? A used trailer might not even hav a VIN number if it’s home made! If you don’t know the answer to this, could you direct me to someone that might know more about this? Thanks for your help

    1. Joe says:

      I honestly don’t know the answer to this one I’m afraid. Good luck!

      Joe

  6. Horst R Quecken says:

    A huge help !…many thanks,HQ

  7. M McDonald says:

    Wow, this was super helpful. Thanks!

  8. Kirby says:

    Thank you for posting this information. its very useful. i don’t see anything mentioned about duties. I assume CBSA will also levy a duty on a new trailer. Do you know where I can find the applicable duty?

    Thanks again!

    1. John says:

      If the manufacturer is in USA or Mexico there are no duties.

  9. Steve says:

    I wanted to write and thank you very much for taking the time to post this.
    I followed this pretty much to the letter to import a trailer from Florida to Ontario.
    Very very helpful

    Thank you

    1. Joe says:

      Very glad you found it useful!

      Joe

    2. Kevin says:

      Hi Steve
      Did you need a permit for every State on your way back to Ontario?

      1. Steve says:

        Hi Kevin
        At first I was under the impression that I would have to do that.
        I was half way through contacting all the dot offices when the Pennsylvania office explained that a simple temporary plate issued from the state selling the trailer would cover the trip home across the border. Total cost was $10 and covered 30 days..
        It is called a print on demand temp plate.

        Importing across was a breeze. Just make sure it is not a motorized vehicle of any kind. That changes things substantially.

        The RIV process is a breeze too.

        Fill out online forms, pay fee, bring trailer to Canadian tire for RIV inspection, send paper to RIV, place received RIV sticker on trailer. Bring all paperwork to license bureau, put plate on trailer… Done!