Tiny House Construction – Week 5

Tiny House Construction – Week 5

With the walls in place, my first challenge was to wrap my head around the puzzle that is strengthening and securing the walls so they stay there. I knew what I had to do, but making sure to do things in the right order took some thought. Eventually I got there.

Watch a time lapse to see what I got up to this week:

Day 19

Today I focused on making sure the walls were straight. To do this I had to remove the braces and check every section with a spirit level. I was pleased with how solid the walls felt, even though there isn’t much holding them down. By the time I am through they should be rock solid.

I also finished off some nailing and small framing jobs that I wasn’t able to do before the walls where raised. It’s funny how things have changed with the walls up. Working around the house I now have to exit through the door opening just to grab and tool, whereas before I could just step over what I was walking on. The little things you don’t consider.

Day 20

More framing today, this time the two loft walls which will be the bedroom. These went pretty smoothly, but I am still surprised by how much harder framing is than I imagined. Especially keeping the walls perfectly square whilst nailing them together. It is obviously a skill that comes with time.

I also got hold of the wood that will be the two visible loft joists. These need to be strong, and will also the first piece of wood that will be visible, so they need to look nice. I decided to go with Douglas Fir. I could only find green, rough cut pieces at the local saw mill which had been sitting out in the rain. This got me thinking that I would need to dry them out and find someone to plane them to size, which would be a fair bit of work for two pieces of wood! Checking at the builders merchants however I found exactly what I was looking for on the shelf. I selected some niece looking pieces that hadn’t been knocked around and I was on my way.

Day 21

Richard and Sarah both came by today, which was a big help as the jobs I had lined up all consisted of lifting things up to the loft level. With a bit of trial and error planing, and some ‘fine tuning’ with a mallet we managed to get the loft joists up and into place.

We have a second storey!

We have a second storey!

Next we lifted the loft walls up and temporarily braced them in place. Thanks you two!

The loft walls in place

The loft walls in place

Day 22

Today was meant to be a day off, but my tiny house barn neighbours where moving their house out of the barn today, so I offered to help out.

Progress was slow to begin with, so in between helping I managed to drill the holes for, and install the threaded rods which run from the trailer right up to the top of the wall, forming a nice solid connection.

Threaded rods for a metal connection between the trailer and double top plate

Threaded rods form a metal connection between the trailer and double top plate

Once the other house was on the move I went to it’s new location to lend a hand getting it set up. It was a beautiful day and I helped the guys install roof overhangs, picking up as many tips along the way as I could. It was really interesting to see skilled carpenters at work, and I enjoyed working side by side with them. It can’t hurt to have a favour in my back pocket too.


Tiny houses aren't meant to live indoors

Tiny houses aren’t meant to live indoors

Day 23

With the threaded rods installed, the walls where starting to become nice and secure, but I wasn’t done. Next on the list was to install metal strapping diagonally on all of the walls to stop them from collapsing, known as ‘racking’. The aim here is to add extra strength to the walls, especially whilst being towed.

Adding strapping to the walls

Adding strapping to the walls

Carly was working with me today, which made things a lot easier, as the strapping is a little cumbersome to manoeuvre into place. After a little trial and error we figured out a good system of nailing it into place. To save my arm, I decided to use the palm nailer to drive the nails in to place, which worked pretty well.

With this in place, the walls are starting to feel very strong indeed. Once the sheathing is on, I think I may have achieved ‘bomb proof’ status.

I now need to start getting serious about building the roof, the next piece of the puzzle. I should probably order my doors and windows too.


Hi, call me Joe. I am a traveller, a runner, a beer drinker, a film lover, a web developer, a hiker and not a very good darts player. I am from the UK, have a BSc in Computer Science from Cardiff University and currently live in Canada.

1 Comment


about 4 years ago

At last you had some fine days. It's really taking shape isn't it. Congratulations. love, Grandma


Leave a Comment

Please be polite. We appreciate that.
Your email address will not be published and required fields are marked